Ten advantages of LED tubes!

Update:11 Jan 2021

LED tubes are also commonly known as LED light tubes, L […]

LED tubes are also commonly known as LED light tubes, LED fluorescent tubes, and LED fluorescent lamps. The light source adopts LED as the luminous body. The traditional fluorescent tube is also called a fluorescent lamp. There is a filament at both ends of the lamp. The tube is filled with traces of argon and light mercury vapor. The inner wall of the tube is coated with fluorescent powder. The gas between the two filaments emits ultraviolet rays when conductive. Make the phosphor emit visible light. Because of the heavy metal pollutant "mercury", the environmental pollution caused by discarded fluorescent tubes is very severe.

LED tubes use light-emitting diodes as light sources, which have higher light efficiency, more energy saving, longer service life, and more environmental protection. Become an ideal product to replace fluorescent tubes at this stage. The LED tube is the same as the traditional fluorescent lamp in terms of size and caliber. There are T5 tubes and T8 tubes with lengths of 0.6m, 0.9m, and 1.2m.

Ten advantages of LED tubes:

1. Environmentally friendly lamps
Traditional fluorescent tubes contain a large amount of mercury vapor, if broken, the mercury vapor will volatilize into the atmosphere and cause pollution. However, LED tubes do not use mercury at all, and LED products do not contain harmful substances such as lead. The shell can also be recycled, which is not harmful to the environment. LED tubes are widely regarded as green lighting in the 21st century.

2. Less fever
Traditional lamps use tungsten filaments to emit light, which will generate a lot of heat. LED lamps have a luminous efficiency of 140LM/W and a high light conversion rate. The surface temperature of the product is below 60℃. It does not produce ultraviolet rays. It does not produce documents or clothing. Fading phenomenon.

3. No noise
LED lamps do not produce noise and are the best choice for occasions where precision electronic instruments are used. Suitable for occasions such as library buildings and offices.

4. Protect your eyes
Traditional fluorescent lamps use alternating current, so 100-120 stroboscopic flashes per second. The LED tube uses LED constant current to work, which directly converts AC power to DC power, effectively reducing LED light decay, quick start, no flicker, and eye protection.

5. No mosquito trouble
LED tube does not produce ultraviolet light, infrared light and other radiation, does not contain harmful substances such as mercury, and has less fever. Therefore, unlike traditional lamps, there are more mosquitoes surrounding the lamp source. The interior will become cleaner and tidy.

6. Wide voltage range
The traditional fluorescent lamp is lit by the high voltage released by the rectifier, and cannot be lit when the voltage drops. And LED lamps can light up within a certain range of voltage

7. Power saving and long life
The power consumption of the LED tube is less than one third of that of the traditional fluorescent lamp, and the lifespan is 10 times that of the traditional fluorescent lamp. The brightness is basically the same as that of the traditional fluorescent lamp. The normal service life is more than 30,000 hours, and the power saving is up to 70%. It can be long-term Use without replacement, reducing labor costs, and more suitable for occasions that are difficult to replace.

8. Strong and reliable
The LED lamp body itself is made of epoxy resin instead of traditional glass, which is more sturdy and reliable. Even if it is hit on the floor, the LED will not be deformed or damaged, so it can be used with confidence.

9. Good versatility
The appearance and size of the LED tube are the same as the traditional fluorescent lamp, which can replace the traditional lamp.

10. Rich colors
Make full use of the rich color of LED to make lights of various luminous colors.